Videos & Images

More Views

‹ ›

$\"38007-XRF-AM13F\"$

Marmitek X10 Appliance Module - Euro Plug - AM13F (X-10 RF Accessories)

New version AM13F with quieter relay.

On/Off function to control an energy saving light, heater, fan, coffee maker, etc.
Designed to operate with 230V AC loads of up to 500W (incandescent lamps and halogen light) or 230W (motors) or 3600W (resistive loads)
The AM13F is suitable for use with LED bulbs
Euro Plug Type E

Item #: 38007-XRF-AM13F

Availability: Out of Stock

EUR 39,90

Quantity

Details

The AM13F appliance module is a receiver unit that works as a remote controlled switch or relay. You can plug it into any plug socket in the house and control the unit attached to it via X10 commands.

The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 230W.

As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.

Specs

Supply voltage: 230V +-10% 50Hz
Supply current: ≤ 20mA capacitive
500W (incandescent lamps and halogen light) 230W (motors) 3600W (resistive loads)
Responds to X-10 Key codes: All Units Off, On, Off
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: ≥ 180Ohms (L-N) at 120KHz
This product is CE approved for use in the EU
Ambient temperature: -10C to +40C (operation), -20C to +70C (storage)
Dimensions: Length 122, Width 52, Height 44 mm

This product is CE approved for use in the EU

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

Contacts

Videos & Images

More Views

‹ ›

$\"09190-XRF-KR22\"$

Marmitek 09190 Super slim KR22 Keychain Remote (X-10 RF Accessories)

Remote control of up to 4 X10 devices!

Wireless Remote Control
Key ring remote
Switch the lights on from your car
Wireless control of 4 modules

Item #: 09190-XRF-KR22

Availability: In Stock

EUR 34,18

Quantity

Details

X-10 Keyfob RF remote control

A beautiful slim design Remote Control, which you can use to control 4 different addresses, including a dim function. Because of the slim design the KR22 is easy to be taken with you, for instance on your key chain.

Specs

TECHNICAL SPECIFICATIONS

Power supply: 2 x 3V lithium batteries (type CR2016)
RF Range: Up to 30m outdoors, up to 20m through floors and walls.
RF Power: <1mW
RF transmission frequency: 433.92 MHz
Sends X-10 Key codes: On, Off, Dim, Bright.
Number of controllable addresses: 4 (sequential)
Ambient temperature: -10�C to +50�C (operation) -20�C to +70�C (storage)
Dimensions: 85x40x7 mm
Weight: 20 grams

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice.

Manuals

KR22E Brochure

KR22E Manual

Warning

WARNING: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

Contacts

Videos & Images

More Views

‹ ›

$\"08940-XRF-HR10\"$

Marmitek 08940 HR10 Palm Pad Remote (X-10 RF Accessories)

Remote control for ALL 256 X-10 addresses!

Our simplest remote control for ALL 256 X-10 devices
Glare on the TV screen? Dim the lights without interrupting the movie
Left the garage light on? Turn it off without stepping outside
Control devices from other rooms, works through walls and ceilings

Item #: 08940-XRF-HR10

Availability: Usually ships in 3-4 days

EUR 46,28

Quantity

Details

Marmitek introduces the HR10 handheld remote control to manage up to 256 X-10 devices.

HR10 X10 RF Palm Pad Remote

The HR10 is a handheld remote control for your X-10 home control system (other components sold separately). Control lights and appliances all around your house without leaving the couch! Just plug in an RF transceiver module (eg. TM13) into any nearby power point and you'll have total wireless control of any device connected to an X-10 receiver.

The remote control operates as many as 16 lights (or group of lights) that are connected to X-10 home control receivers and it includes dimming and brightening buttons for use with dimmable lights. Alternatively use the remote to trigger up to 32 different macros, giving you control of up to 256 possible devices in your home!

The plug-in base receives the commands and instantly sends them along the home's power lines. The system uses radio frequency signals instead of infrared, so you won't have to be in direct line of sight for proper operation. As long as the remote is within 30 metres of the plug-in base, it will work like a charm! The handheld wireless controller requires 4 AAA batteries, sold separately.

Specs

TECHNICAL DATA

Batteries: 4 x AAA
Operating life: 1 year using alkaline batteries
RF frequency: 433,92 MHz
Radiated output: <5833 �V/m @ 3m
RF operating range: 30m (open field)
Code for RF Transmission: 16 bit

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice.

Manuals

HR10 Remote Manual

FAQ

Contacts

Videos & Images

More Views

‹ ›

$\"09053-XRF-MS13\"$

Marmitek 09053 MS13 Wireless PIR Motion Detector (X-10 RF Accessories)

Indoor/Outdoor Wireless PIR Motion Sensor!

Wireless motion sensor
Ideal when you're on holiday: simulates your presence
Reacts to movement: always or only when it is dark
Built-in light/dark sensor
Off command after adjustable time
Settings will not be lost while replacing batteries

Item #: 09053-XRF-MS13

Availability: In Stock

EUR 61,72

Quantity

Details

Switches lights and appliances ON while present and switches them OFF later. Switches outdoor and indoor lights ON when you come home in the evening. Saves energy by automatically switching lights and appliances OFF in empty rooms. Protects your home by early detection of unexpected visitors. Automatically route lights to the bathroom, for instance. Completely wireless. Splash waterproof for inside and outside use.

Imagine to automatically turn on the room lights when you enter or, by using the CM15Pro Computer Interface, to set up macros to run when the MS13 senses "occupancy". The MS13 motion detector sends Wireless Radio Frequency (RF) signals to an X-10 Transceiver (TM13) or any X10 security system base receiver (SC9000). The receiver then passes the signals onto your house wiring to turn on lights (or appliances) around your home. The MS13 will send a RF signal to turn off the light at the users pre-determined time. The user can set the MS13 to turn off at 1, 2, 4, 8, 16, 32, 64 or 128 minutes later as long as no motion has been detected.
The MS13 has a built-in photocell that detects when it's dark, enabling the user choose to only turn ON the lights when it's dark (in this condition the MS13 does not transmit its RF signal during daylight). Alternatively the user may choose to be advised all the day that someone is there; not using the photocell, the MS13 will transmit the RF signal day and night when someone approaches. In addition, the MS13 sends signals when it detects dusk and dawn so it can turn a light ON when it gets dark and turn it OFF when it gets light (in addition to turning lights ON when it detects motion, when it's dark).

Specs

TECHNICAL DATA

Power supply: 2x AAA battery
RF frequency: 433.92 MHz
RF Range: Up to 30m free field, up to 20m through walls and ceilings
RF Power: 1mW
PIR Range: 45� - 5 metres, straight ahead - 12 metres
Ambient temperature: -10�C to +30�C (operation); -20�C to +70�C (storage)
Dimensions: 67x67x27mm

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice

Manuals

MS13 Brochure

MS13 Manual

FAQ

Contacts

Videos & Images

More Views

‹ ›

$\"08071-XRF-SS11\"$

Marmitek 08071 Slimline Wireless RF Wall Switch SS11 (X-10 RF Accessories)

Slimline Wireless Switch/Dimmer.

Ultra thin stick X-10 switch
Can be mounted everywhere
Wireless control of 1 X-10 adress
Dimensions: 80 x 80 x 20 mm

Item #: 08071-XRF-SS11

Availability: Usually ships in 3-4 days

EUR 34,18

Quantity

Details

SS11 - Slimline Wireless Switch/Dimmer

Very thin elegant wireless switch. Ideal solution in situations where an extra switch is desired, without running extra wires. Can be attached to walls, glass, doors, tables etc. Sends a high frequency signal through walls and floors. Totally wireless: battery operated. Switches 1 module and is equipped with a dim function. Use the SS11 as a central control panel for your Marmitek installation!

Specs

TECHNICAL DATA

General specifications

Supply voltage: 1 x A23 12V Alkaline Battery (supplied)
RF Range: Up to 30m free field, up to 20m through walls and ceilings
RF Frequency: 433,92 MHz
RF power: 10mW
X-10 Key codes: On, Off, Dim, Bright
Ambient temperature: 10�C~50�C (operation), -20�C to +70�C (storage)
Dimensions: 80mm x 80mm x 20mm

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice.

Manuals

SS11 Brochure

SS11 Manual

Warning

ATTENTION: The slimline wireless RF wall switch requires to work any X-10 Transceiver (e.g. TM13).

FAQ

Contacts

Videos & Images

More Views

‹ ›

$\"08119-XRF-SS12\"$

Marmitek 08119 Slimline Wireless RF Wall Switch SS12 (X-10 RF Accessories)

Slimline Wireless Switch/Dimmer.

Slimline wireless double switch
Ultra thin stick X-10 switch
Can be mounted everywhere
Wireless control of 2 X-10 adresses
Dimensions: 80 x 80 x 20 mm

Item #: 08119-XRF-SS12

Availability: Usually ships in 3-4 days

EUR 39,56

Quantity

Details

The SS12 can be mounted anywhere in the house, and will fit in every interior because of the universal design.
With this RF transmitter you can send the following commands to all X-10 transceivers for the 2 programmed house and unit codes: ON, OFF, DIM and BRIGHT.

SS12 - Slimline Wireless Switch/Dimmer

Very thin elegant wireless switch. Ideal solution in situations where 2 extra switches are desired, without running extra wires. Can be attached to walls, glass, doors, tables etc. Sends a high frequency signal through walls and floors. Totally wireless: battery operated. Switches 2 modules and is equipped with a dim function. Use the SS12 as a central control panel for your Marmitek installation!

Specs

TECHNICAL DATA

General specifications

Supply voltage: 1 x A23 12V Alkaline Battery (supplied)
RF Range: Up to 30m free field, up to 20m through walls and ceilings
RF Frequency: 433,92 MHz
RF power: 10mW
X-10 Key codes: On, Off, Dim, Bright
Ambient temperature: 10�C~50�C (operation), -20�C to +70�C (storage)
Dimensions: 80mm x 80mm x 20mm

In order to continue improving the product, Marmitek reserves the right to change specifications and/or designs without prior notice.

Manuals

SS12 Brochure

SS12 Manual

Warning

ATTENTION: The slimline wireless RF wall switch requires to work any X-10 Transceiver (e.g. TM13).

FAQ

Contacts

Videos & Images

More Views

‹ ›

$\"08937-XRF-SS13\"$

Marmitek 08937 Slimline Wireless RF Wall Switch SS13 (X-10 RF Accessories)

Wireless Design wall switch/dimmer.

Slimline wireless switch
Ultra thin stick X-10 switch
Can be mounted everywhere
Wireless control of 3 X-10 adresses
Dimensions: 115 x 70 x 7 mm

Item #: 08937-XRF-SS13

Availability: Usually ships in 3-4 days

EUR 41,16

Quantity

Details

SS13 - Wireless Design wall switch/dimmer

Very thin elegant wireless switch. Ideal solution in situations where an extra switch is desired, without running extra wires. Can be attached to walls, glass, doors, tables etc. Sends a high frequency signal through walls and floors. Totally wireless: battery operated. Switches 3 modules and is equipped with a dim function. Use the SS13 as a central control panel for your Marmitek installation!