ZMNHND1


Z-Wave Qubino Flush 1D Relay Plus (Z-Wave Qubino)

Single Relay Switch Micromodule with volt-free contacts.
  • Enables Z-Wave control of lights and appliances
  • Volt-Free (dry) contacts
  • Optional Temperature Sensor
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • Repeater functionality
  • 3-wire system
  • DIY installation
  • Z-Wave Plus Certified

Item #: ZMNHND1

Availability: Usually ships in 2-3 days



EUR 53,98






Album

IconsIcons

Details

Z-Wave Qubino Flush 1D Relay Plus

Single Relay switch micromodule with volt-free contacts.

Z-Wave Qubino Flush 1D Relay Plus
New Qubino Flush Relay Plus with Dry Contacts

The Qubino Flush 1D Relay Plus is a single channel Z-Wave switch with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching micromodule also works as a repeater to improve range and stability of your Z-wave network.

On/Off Flush Relay Switch with dry contacts

Single relay switch capable of operating a load of up to 10A.

  • Dry (Voltage-free) Contacts
  • Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide
  • Works with AC or DC power supply (110-230V AC or 24-30V DC)
  • Extra switch inputs for controlling additional associated devices or 2-way installations
Extra Features

The Qubino Flush 1D Relay includes extra features to make it even more useful in your home automation system.

Temperature Sensor

Using an optional temperature sensor, the Qubino Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

Binary Switch and Sensor Input

The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller.

Strengthens Z-Wave Connectivity

The smart relay micromodule has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

Z-Wave Plus
Z-Wave Plus

The Qubino Flush 1D Relay Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Specs

Technical specifications
  • Wireless: Z-Wave (868.42MHz)
  • Voltage: 110 - 240V, 50Hz or 24 - 30V DC
  • Load: 2300W (10A resistive @ 230V AC), 240W (10A resistive @ 24V DC)
  • Contacts: Single relay contact
  • Power Accuracy: 3W (@ < 50W), 3% (@ > 50W)
  • Power Consumption: < 0.7W
  • Operating Temperature: -10 to +40C
  • Range: up to 50m (outdoors) and 30m (indoors)
  • Dimensions (LxWxH): 42 x 37 x 16mm

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

Contacts

 
ZMNHAD1


Z-Wave Qubino Flush Relay x 1 Plus (Z-Wave Qubino)

Single Relay switch module to control loads up to 10A.
  • Enables Z-Wave control of lights and appliances
  • Monitors power consumption
  • Optional Temperature Sensor
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • 3-wire system
  • DIY installation
  • Z-Wave Plus Certified

Item #: ZMNHAD1

Availability: Usually ships in 2-3 days



EUR 53,98






Album

IconsIcons

Details

Z-Wave Qubino Flush Relay x 1 Plus

Single Relay switch module to control loads up to 10A.

Z-Wave Qubino Flush 1D Relay Plus
New Qubino Flush Relay Plus - Z-Wave Plus with new features

The Qubino Flush 1 Relay Plus is a single channel Z-Wave switch capable of controlling lights and appliances up to 10A. It fits into an existing light switch enabling you to wirelessly control appliances as well as measuring their power consumption.

On/Off Flush Relay Switch

Single relay switch capable of operating a load of up to 10A.

  • Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide
  • Works with AC or DC power supply (110-230V AC or 24-30V DC)
  • Extra switch inputs for controlling additional associated devices or 2-way installations
Extra Features

The Qubino Flush 1 Relay Plus includes extra features to make it even more useful in your home automation system.

Power Monitoring

The Relay monitors the power being used by your appliance and reports actual power (Watts) and total consumption (kWh) - helping you control and reduce your energy bills.

Temperature Sensor

Using an optional temperature sensor, the Qubino Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

Binary Switch and Sensor Input

The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller.

ATTENTION: The Relay Plus has different wiring for the external switches, read the manual before starting wiring - especially if you have used earlier versions of the Qubino relays.

Z-Wave Plus
Z-Wave Plus

The Qubino Flush 1 Relay Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Specs

Technical specifications
  • Wireless: Z-Wave (868.42MHz)
  • Voltage: 110 - 240V, 50Hz or 24 - 30V DC
  • Load: 2300W (10A resistive @ 230V AC), 240W (10A resistive @ 24V DC)
  • Contacts: Single relay contact
  • Power Accuracy: 3W (@ < 50W), 3% (@ > 50W)
  • Power Consumption: < 0.7W
  • Operating Temperature: -10 to +40C
  • Range: up to 50m (outdoors) and 30m (indoors)
  • Dimensions (LxWxH): 42 x 37 x 16mm

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

Contacts

 
ZMNHND1


Z-Wave Qubino Flush Relay x 2 Plus (Z-Wave Qubino)

Dual Relay switch module to control two loads up to 4A each.
  • Enables Z-Wave control of lights and appliances
  • Monitors power consumption
  • Optional Temperature Sensor
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • 3-wire system
  • DIY installation
  • Z-Wave Plus Certified

Item #: ZMNHND1

Availability: Usually ships in 2-3 days



EUR 53,98






Album

IconsIcons

Details

Z-Wave Qubino Flush Relay x 2 Plus

Dual Relay switch module to control two loads up to 4A each.

Z-Wave Qubino Flush Relay x 2 Plus
New Qubino Flush Relay Plus - Z-Wave Plus with new features

The Qubino Flush 2 Relay Plus is a two channel Z-Wave switch capable of controlling two independent appliance or light circuits up to a maximum load of 4A each. It fits into an existing light switch enabling you to wirelessly control appliances as well as measuring their power consumption.

Dual On/Off Flush Relay Switch

Double relay switch capable of operating a two loads of up to 4A each.

  • Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide
  • Works with AC or DC power supply (110-230V AC or 24-30V DC)
Extra Features

The Qubino Flush 2 Relay Plus includes extra features to make it even more useful in your home automation system.

Power Monitoring

The Relay monitors the power being used by your appliance and reports actual power (Watts) and total consumption (kWh) - helping you control and reduce your energy bills.

Temperature Sensor

Using an optional temperature sensor, the Qubino Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

ATTENTION: The Relay Plus has different wiring for the external switches, read the manual before starting wiring - especially if you have used earlier versions of the Qubino relays.

Z-Wave Plus
Z-Wave Plus

The Qubino Flush 2 Relay Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Specs

Technical specifications
  • Wireless: Z-Wave Plus (868.42MHz)
  • Voltage: 110 - 240V, 50Hz or 24 - 30V DC
  • Load: 2x 920W (4A resistive @ 230V AC), 96W (4A resistive @ 24V DC)
  • Contacts: Double relay contact
  • Power Accuracy: 3W (@ < 50W), 3% (@ > 50W)
  • Power Consumption: < 0.7W
  • Operating Temperature: -10 to +40C
  • Range: up to 50m (outdoors) and 30m (indoors)
  • Dimensions (LxWxH): 42 x 37 x 17mm

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

Contacts

 
ZMNHWD1


Z-Wave Qubino RGBW Dimmer Plus (Z-Wave Qubino)

Z-Wave Qubino RGBW Dimmer Plus - Bring Colours to Life with the World's Smallest RGBW Controller.
  • Wireless RGBW Controller
  • 5 special scene effects (Ocean, Lightning, Rainbow, Snow and Sun)
  • Ideal for dimming RGB/RGBW strips, LED strips and bulbs, or even halogen bulbs
  • Compatible with any 12V or 24V light source
  • The world's smallest RGBW dimmer module
  • Easy installation
  • Z-Wave Plus Certified

Item #: ZMNHWD1

Availability: Usually ships in 2-3 days



EUR 61,85






Album

IconsIcons

Details

Z-Wave Qubino RGBW Dimmer Plus

Z-Wave Qubino RGBW Dimmer Plus - Bring Colours to Life with the World's Smallest RGBW Controller

Z-Wave Qubino RGBW Dimmer Plus
Bring Colours to Life - RGBW Dimmer

The Qubino RGBW Dimmer is designed to control your RGB/RGBW strips and LED strips or bulbs in order to create countless colour options and includes 5 special scene effects (Ocean, Lightning, Rainbow, Snow and Sun). The wide range of colours lets you "paint" your home according to your mood. Highlight your favourite wall by illuminating a picture on it in tones that you choose yourself.

The module can work in combination with the other Z-Wave devices in your house. You can control it either remotely through the Z-Wave network or through wall switches.

Z-Wave Qubino RGBW Dimmer Plus
Colour and Mood Wizard

Choose from among 16 million different shades. Change the colours of your rooms and the things in them and create lighting effects on outdoor surfaces such as summerhouses, paths or even the outlines of your house. Come home from work to a relaxing atmosphere created by a preset lighting scene.

Use it to decorate your kitchen work surface or to light up the shower or the mirror in your bathroom. Whatever the weather outside, let your living room glow in warm and welcoming rainbow colours. And all this by simply tapping your smartphone or tablet!

What is it Used For?

The Qubino RGBW Dimmer is ideal for dimming RGB/RGBW strips, LED strips and bulbs, or even halogen bulbs. It can create different lighting effects (scenes) and adjust the colour and intensity of the light source.

The Smallest of Them All

The Qubino RGBW dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

The Simplest Installation

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.
Z-Wave Qubino RGBW Dimmer Plus installation
Remarkably Versatile

The Qubino RGBW Dimmer can operate across a wide temperature range, from a chilly 0C to a scorching 40C (32F-104F). It is used to mix the colours of RGB/RGBW/LED strips and LED bulbs.

Each module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

Z-Wave Plus
Z-Wave Plus

The Z-Wave Qubino RGBW Dimmer Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Specs

Technical specifications
  • Frequency: 868.42MHz, Z-Wave
  • Power supply: 12-24VDC
  • Power consumption: 0.48W under 12V, 0.72W at 24V
  • PWM Output Frequency: 488Hz
  • Output power: 8A per channel, 13A max total (3.25A recommended for each channel in RGBW use)
  • Maximum load (eg halogen lamps): 12VDC: 156W combined; 24VDC: 312W combined
  • Range: up to 30 m indoors (depending on surrounding materials)
  • Operating temperature: -10 ~ 40 C
  • Space required for installation: 60mm
  • Dimensions (W x H x D): 40.5 mm x 32 mm x 14.5 mm
  • Weight: 25g
  • Certifications: CE, RoHs

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

Contacts

 
ZMNHDD1


Z-Wave Qubino Flush Dimmer Plus (Z-Wave Qubino)

Universal Z-Wave Flush Dimmer to control all types of light sources.
  • Enables Z-Wave control and dimming of your lights
  • MOSFET technology enables it to work with all bulb types
  • Works with LEDs, Halogens, CFL and Low Voltage bulbs
  • Monitors power consumption
  • Optional Temperature Sensor
  • Z-Wave Plus Certified

Item #: ZMNHDD1

Availability: Usually ships in 2-3 days



EUR 53,98






Album

IconsIcons

Details

Z-Wave Qubino Flush Dimmer Plus

Universal Z-Wave Flush Dimmer to control all types of light sources.

Z-Wave Qubino Flush Dimmer Plus
New Qubino Flush Dimmer

The Qubino Z-Wave Flush Dimmer is the first Z-Wave MOSFET dimmer capable of working with the widest range of bulb types. It fits into an existing light switch enabling you to wirelessly control lights as well as measuring their power consumption.

The Qubino Flush Dimmer can operate across a wide temperature range, from a chilly -10?C to a scorching 40?C (14?-104?F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

Widest range of Bulb Types
Z-Wave Qubino Flush Dimmer Plus

The Qubino Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types, we've tested it with all of them:

  • Halogen and Incandescent (230V)
  • Dimmable LEDs (230V)
  • Dimmable CFL and Fluorescent (230V)
  • Low Voltage Halogen (24V)
  • Low Voltage LED (24V)

ATTENTION: These units require a 3-wire system (including neutral). Please check your installation before purchasing.

Extra Features

The Qubino Dimmer includes extra features to make it even more useful in your home automation system.

Power Monitoring

The Dimmer monitors the power being used by your lighting and reports actual power (Watts) and total consumption (kWh) - helping you control and reduce your energy bills.

Temperature Sensor

Using an optional temperature sensor, the Qubino Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems.

Binary Switch and Sensor Input

The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller.

Z-Wave Plus

The Z-Wave Qubino Flush Dimmer Plus is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).

Specs

Technical specifications
  • Wireless: Z-Wave Plus (868.42MHz)
  • Voltage: 110 - 240V, 50Hz or 24 - 30V DC
  • Load: 140W (resistive @ 230V AC), 21W (resistive @ 24V DC)
  • Dimmer type: Trailing Edge (AC), PWM (DC)
  • Power Measurement: 2% accuracy
  • Power Consumption: < 0.7W
  • Operating Temperature: -10 to +40C
  • Range: up to 50m (outdoors) and 30m (indoors)
  • Dimensions (LxWxH): 42 x 37 x 16mm

Warning

ATTENTION: extreme local conditions such as thick walls, a great deal of iron in walls or ceilings and high levels of radiation as a result of radio/TV masts next to the house may make signal transmission impossible. 99% of European housing, however, should encounter no problems at all in terms of signal loss.

FAQ

Contacts

 
Shop with confidence :
Courtesy and professionalism
Courtesy and professionalism
Professional assistance
Professional assistance
100% Secure PayPal Certified
100% Secure PayPal Certified
Fast shipping
Fast shipping
Protected by Copyscape Plagiarism Checker - Do not copy content from this page.
Back to TOP